◆Performance specifications


Models NEX110
Specification item Unit 9E 12E(Standard) 18E
Injection Screw diameter mm AA
26		 A
28		 B
32		 AA
28		 A
32		 B
36		 AA
32		 A
36		 B
40
Injection capacity cm3 59 69 90 77 101 127 117 148 182
Plasticization capacity(PS) kg/h 19 28 40 28 40 54 40 54 75
Max. injection pressure MPa
[kgf/cm2]		 265
[2700]		 243
[2480]		 186
[1900]		 265
[2700]		 223
[2280]		 176
[1800]		 265
[2700]		 218
[2220]		 176
[1800]
Injection rate Standard cm3/s 159 185 241 166 217 275 161 204 251
High velocity cm3/s 201 255 314
High load cm3/s 127 148 193 135 177 224 161 204 251
Injection velocity Standard mm/s 300 270 200
High velocity mm/s 250
High load mm/s 240 220 200
Screw velocity rpm 0～300 0～300 0～300
Hopper capacity(Optional) L 25 25 25
Clamping Clamping force kN[tf] 1080[110] 1080[110] 1080[110]
Clamping stroke mm 350 350 350
Mold thickness(min.-max.) mm 220～410 220～410 220～410
Max. daylight opening mm 760 760 760
Tie bar clearance(HxV) mm 460x460 460x460 460x460
Die plate dimensions(HxV) mm 647x647 647x647 647x647
Min. mold dimensions(HxV) mm 325x325 325x325 325x325
Locating ring diameter mm 100 100 100
Ejector stroke mm 85 85 85
Others Heater band capacity kW 7.22 8.36 9.26 7.98 9.13 8.88 10.57
Machine dimensions(LxWxH) m 4.45x1.19
x1.80
 4.49x1.19
x1.80		 4.53x1.19
x1.80		 4.48x1.19
x1.80		 4.57x1.19
x1.80		 4.61x1.19
x1.80		 4.78x1.19
x1.80
Floor dimensions(LxW) m 4.12x0.78 4.12x0.78 4.12x0.78
Machine weight t 4.8 4.8 5.0