-
Increased yields
"Search for more stabilized molding operation without occasional defectives."
1. Increased Yields
"Search for more stabilized molding operation without occasional defectives."
- High-Velocity injection control at 100μsec (new controller TACT) promises high-precision and stable molding.
The response and repeatability of process and V-P change control have improved, demonstrating its superiority in high-speed molding.
- High-precision nozzle and barrel temperature control.
*2E～9E: Nozzle, head, front, middle, and rear
*1E, 12E～210LE: Nozzle, front, middle, rear1, and rear2
- Simultaneous heating of the nozzle and barrel
(prevent from carbonization and deterioration of resins in the nozzle).
- Material deterioration prevention function
(during manual operation, the temperature will automatically be dropped to the holding temperature when the specified time has elapsed.)
- With our accumulated technical expertise,we offer a wide selection of high-quality special screws.
-
Higher productivity
"Aim at high cycle, high precision, high rigidity and high durability."
2. Higher productivity
"Aim at high cycle, high precision, high rigidity and high durability."
- Mold opening/closing operations and ejector operations become faster.
- Simultaneous operations, such as mold opening/ejection during metering and injection during mold clamping, can easily shorten the molding cycle.
-
Maximized protection of molds
"Minimize damage to molds due to inclusion of moldings."
3. Maximized protection of molds
"Minimize damage to molds due to inclusion of moldings."
- New high-sensitivity mold protection function (Patent pending)
- "High-speed reaction" permits immediate mold opening right after detection of a foreign substance during clamping operation.
In the NEX Series, the foreign substance detection time from catching a foreign substance until start of mold opening is 13 ms,winch is 1/10 of the detection time of our conventional machines, improving the mold protection function.
-
Amplified range of molding
"Aim at higher injection performance and diverse molding control programs."
4.Amplified range of molding
"Aim at higher injection performance and diverse molding control programs."
- Higher injection velocity and pressure available
- The injection velocity has been increased by a maximum of 40%
(as compared with our conventional machines).
- Three types of specifications are available according to the intended application:standard, high-speed and high-load (this for thick-wall products).
- The "high-load specification" applies to lenses and other thick products.
The injection time (pressure holding time) can be set longer than the standard specification.
- Diverse control programs will meet a wide range of your molding needs
- HPC (Injection holding pressure positioning control): This control is useful for high-velocity molding, uniform molding of thin-wall products, and prevention of sink and warpage.
- CPN3 (Clamping compression molding): This is a method to perform clamping and filling simultaneously. This is effective to reduce product's stress and ensures smoother gas ventilation.
- MIP0 (Processing inside mold): Ejector operation during clamping allows gate-cutting and local compression of the products.
- IDMC (Injection during mold clamping): Injection starts just before the high-pressure mold clamping. This control is useful for degassing the mold and shortening the cycle time.
-
More operator-friendly considerations
"Improve operability and working environment."
5. More operator-friendly considerations
"Improve operability and working environment."
- 12.1-inch color LC display with tilt device
- Controller can be operated in any of the following six languages (standard specification): English, Japanese, Chinese, Korean, Spanish and Thai.
- Display of 1,000 items of operation history
-
Shorter time for indirect works
"Simplify tooling/setup and maintenance."
6.Shorter time for indirect works
"Simplify tooling/setup and maintenance."
- Renovation of safety door
A wide opening of the safety doorframe facilitates setup and maintenance of molds.
A large transparent door cover gives an open view of the mold and its surroundings,
improving the safety during the takeout robot adjustment and purging of hot runner molds.
- Easy attachment/detachment of injection and mold clamping covers.
- Improved programming function.
Simple interface programs with auxiliary devices can freely be created on the screen
The program can be saved together with the molding data. (Ladder programming function)
Various error input and signal output function can be assigned to the four of input/output terminals. (Simple programming function)
- Internal memory for molding conditions: up to 300 (standard).
- USB memory can be used as an external memory (optional)
It can store the molding consitions (up to 300), waveform data, and image data.
It allows users to manage molding consitions together with the corresponding sample images, which also can be displayed on the TACT screen.
|
|
